Solid-Surface 101 Fabrication Training hosted in Phoenix, Arizona
Hands-on training for safe, precise solid surface fabrication & techniques.
TBA
* Registration open until 11/10/26 at 12:00 AM (Arizona Time)
The ISFA Certified Solid Surface Fabrication Training Program is a 100% hands-on, 1.5-day course designed to give fabricators real-world experience working with solid surface materials. Rather than simply observing demonstrations, participants actively fabricate projects while learning proper techniques, tooling, safety practices, and industry best practices in accordance with manufacturer warranty guidelines.
Throughout the training, attendees will gain practical experience across every stage of the fabrication process, including:
- Layout and templating
- Seaming techniques
- Proper support methods
- Stacked edges and radius fabrication
- Cutouts
- Coved backsplashes
- Installation best practices
- Repair techniques
As part of the course, participants will complete a full vanity application featuring an integral bowl sink, drop edge, set-on backsplash, and professional sanding and finishing techniques—providing a finished project that reinforces the skills learned throughout the training.
Whether you're new to solid surface fabrication or looking to refine your craftsmanship, this instructor-led training builds the confidence, consistency, and practical skills fabricators can immediately apply in the shop.
Session Completion
Participants who actively engage in the training and successfully complete the fabrication project will receive an ISFA Certificate of Completion, recognizing their successful participation in the Certified Solid Surface Fabrication Training Program.
Please note: It is recommended that attendees do not schedule departing flights before 6 pm to allow time for questions and additional training.
Recommended Hotels:
- Holiday Inn and Suites Phoenix Airport by IHG
3220 S 48th St.
Phoenix, AZ 85040
(480) 543-1700
To receive the discounted association rate, please use corporate code 787233909 when booking online. - Courtyard by Marriott Phoenix Airport
2621 S 47th St.
Phoenix, AZ 85034
(480) 966-4300 - Hilton Phoenix Airport
2435 S 47th St.
Phoenix, AZ 85034
(480) 894-1600
Registration Options
|
Registration Options
|
Price |
|---|---|
|
Solid Surface Training -Nonmember
|
$899.00 |
Agenda
| November 11 | |
| 8:00 AM - 8:15 AM |
Welcome, Safety Review & Course Overview
Solid surface basics: properties, applications, industry standards Fabrication fundamentals: layout, templating, seaming, support Q&A to clarify concepts before hands-on |
| 8:15 AM - 9:30 AM | Templating and Layout Measuring, planning, and creating accurate templates to ensure precise fabrication and installation. |
| 9:30 AM - 10:30 AM | Seaming Master the techniques for joining solid surface pieces using color-matched adhesives, proper edge preparation, clamping methods, and finishing techniques to produce strong, virtually invisible seams. |
| 10:30 AM - 11:00 AM | Support Methods Installing proper supports to ensure structural integrity and long-term performance. |
| 11:00 AM - 11:30 AM | Stacked Edge with Inside Corner Radius Learn how to fabricate stacked edge profiles and create smooth inside corner radiuses for enhanced strength, seamless appearance, and professional-quality finishes. |
| 11:30 AM - 12:30 PM | Lunch Break Enjoy a complimentary lunch, included with your training registration. |
| 12:30 PM - 1:30 PM | Cutouts Properly laying out, routing, reinforcing, and finishing sink and appliance cutouts to ensure precise fit, durability, and long-term performance. |
| 1:30 PM - 2:30 PM | Covered Backsplash Fabrication Learn to fabricate seamless coved backsplashes that provide a clean, durable transition between the countertop and wall while enhancing appearance and simplifying maintenance. |
| 2:30 PM - 3:30 PM | Repair Techniques & Wrap-Up of Day 1 Learn practical methods for repairing common solid surface damage, including scratches, chips, and minor defects, while reviewing the day's fabrication techniques and preparing for the next phase of training. |
| November 12 | |
| 8:00 AM - 9:00 AM | Daily Safety Briefing and Vanity Assemble Start the day with a safety refresher, then assemble the vanity project using the fabrication skills developed throughout the course to produce a finished, professional-quality application. |
| 9:00 AM - 10:00 AM | Integral Sink Bowl Installation Learn the proper techniques for installing an integral sink bowl, including preparation, adhesive application, clamping, and finishing to create a durable, seamless installation. |
| 10:00 AM - 10:45 AM | Drop Edge Fabrication Learn how to fabricate and bond drop edges to create the appearance of a thicker countertop while ensuring strength, precision, and a seamless finished edge. |
| 10:45 AM - 11:45 AM | Sanding & Finishing Techniques Learn proper sanding and finishing methods to achieve a smooth, consistent surface while producing the desired finish and restoring the material's professional appearance. |
| 11:45 AM - 12:00 PM | Final Review, Questions & Certification Presentations Review the key concepts and techniques covered throughout the training, ask final questions, and celebrate successful completion with the presentation of ISFA Certificates of Completion. |
